Comparing Steel Sheds to Other Sheds

May 17th, 2015 by hometopper

There are several types of sheds but keeping them aside, steel shed has larger advantages as compared to others. Here are some of the types of sheds along with steel sheds.

  • Pole sheds

Wooden sheds are such which are buried in the ground and they became the main columns. They are attached to rafters and girts which are attached to each pole. There are timber poles also but they are generally not at the consistent diameter which makes the task little bit difficult to get the walls straight. The girts must be jagged into the poles but the finish which this gets would be rough when compared to steel sheds.

Pole shed generally look cheap because the material used in it is very basic and the shed is also very simple. Spans in case of pole sheds are very limited and but they usually have the internal support poles. There are certain kit systems which doesn’t include gutter and flashings.

  • Steel sheds

Steel shed make use of steel columns which is anchored to a concrete foundation which makes really easy to align columns. Most of the components are already cut to the length with structural bolt holes which are already punched with accuracy. Cladding, girts and purlins are attached by self drilling tek screws.

  • Timber framed sheds

This type of shed makes use of nog walls and stud which is same as to which you see in many kinds of home. Generally it is seen in the single or double garages. Here web trusses are used which take large of your roof space. it gets dirty easily and also looks dirty and untidy.

Steel is environment friendly

  • Steel is such a product which is completely recyclable and steel is a product which is most recycled in the world.
  • Very few materials are such which can be recycled again and again without losing any of its properties and steel is one of them.
  • 40 percent of the global steel output comes from the recycled scarp.
  • There are many steel products which can be prefabricated with precision thus reducing its waste to its minimum.
  • Approximately 90% or more of the commercial steel construction waste is recycled.
  • Almost 82% of the waste which is generated from the steel making process is recycled and put back into the process.

Steel

Steel is a material which is lustrous, ductile, durable, strong and malleable. Steel is flexible to alloy and coated so that it can provide variety of products which is best suited to today’s environment of building. The benefits of using steel in the building include:

  • Steel is recyclable along with the quality of reusing it.
  • Steel is light weighted product so it can be transported easily.
  • Steel is a non combustible material.
  • Steel is a low maintenance material and has a long life span.
  • Steel is very strong so which adding to the structure you need to apply other extensions for support.

 

 

 

 

How to Remove Moss from Roof

September 3rd, 2014 by Mindes

removing moss from roofThe common cause of roof damage is accumulation of moss on the top surface of the roof between the shingles or the tiles which are place and fixed in the roof. you will find most of the moss growing in the areas where there is more moisture in the atmosphere, due to that the moss is grown on the roof which later on damage the roof immensely which can cost more of expenditure for the home owners to replace the whole roof with the new roof. so killing and removing the accumulated moss from the surface of the roof is very important and is mandate too. There are certain steps which will help you to figure out how to remove the accumulated moss from the roof surface of the home.

How to remove the moss from the roof:

  • Firstly you will need a long handled fork which will help you to remove the gathered and grown moss from the roof. This fork will work as the scrap and will remove the moss by scratching it from the surface. As due to the presence of moss on the roof, the roof gets a bit loose so do not use the fork sharply on the roof otherwise it will delete of the loosened shingles or the tiles on the roof.
  • After scrabble it from the roof you should apply the moss liquid which will fully and wholly remove the moss from the roof as it acts as the powerful agent for removing it from the roof. This liquid of removing the moss is made up of ammoniated soap of acid which kills the moss accumulated on the roof. The effect of this liquid stays up to a year on the roof.
  • If you want to opt for the natural procedure of removing the moss from the roof than you can go for the mixture of salt and hot water and spray it on the surface of the roof to remove it from roof. You will have to repeat the procedure of spraying it on the roof for more than two times for removing the moss completely from the roof.
  • It can also be removed with the help of zinc strip which the home owners need to place on the roof before it is the time of rain. With the help of rain water, the zinc will be corrugated with water and will flow from the surface of the roof. This will automatically drain away the moss which is gathered on the surface of the roof and clean the roof completely.
  • After cleaning the roof which was accumulated from moss, the roof must be properly washed and preservatives must be applied to the surface of the roof to stop the moss to grow up again on the roof. These preservatives will be helping agent to the roof and will not allow any moss to grow its place again on the surface of the roof.
  • With the help of these steps the roof will be properly cleaned and maintained by the home owners by their own and will incur less cost expenditure to the home owners.

Top 5 Herbal tea plants for your home

March 4th, 2014 by Home Tips

Herbal tea plantsDuring winter season everyone prefers to have a cup of tea. There are different types of plants which you can grow in your herbal tea garden. Below given are some of the essential 5 plants for your tea garden.

Herbal plant 1- The first herbal plant is mint. Spearmint and peppermint are the two varieties of mint family. Mint is typically made from these two things. Citrus and chocolate mint plants are the new mixtures of mint that can be grown in the herbal tea garden. Crush a few leaves between your fingers before allowing them to steep in hot water.

Herbal plant 2- Chamomile is also a great herb and it is an all time favorite for herbal tea gardens. You should grow it indoors in a pot because it’s quite simple to grow inside. Chamomile is a good tea to use for a painful throat. This tea is very gentle and comforting and drifts off to sleep.

Herbal plant 3- Jasmine tea will never stand northern winter, so if you wish to keep a jasmine tea plant make some indoor arrangements for its cultivation. Jasmine tea has fruity and some striking flavors. Being a creeping plant it requires something to climb on. Jasmine develops well in plain pot.

Herbal plant 4- Lavender is another herbal plant which you can grow in herbal tea plant category. Lavender is instantly identified by its summer time perfume and purple blooms. It makes a wonderful decoration to your tea garden. Fresh or dried lavender prevent moths and other insects thus providing brightness to your room and garden. Drinking lavender tea is a homeopathic way to release headaches.

Herbal plant 5-
Violets are excellent tea rich in vitamin A and C and its presence in herbal tea garden is very soothing. The top flavor comes from dried plants. You can make the violets float on the top of tea for the sake of appearance.

How to install a suspended ceiling

February 28th, 2014 by Home Tips

suspended ceilingPlanning to install suspended ceiling at home? Suspended ceiling is a nice addition to your home given its soundproofing properties & how it also helps to skirt the untidy wires & ductwork. The suspended ceiling is structured with metal channels called cells that are further filled panels or ceiling tiles. Here goes a brief on DIY suspended ceiling installation.

First, decide on the needed quantity of panels for the job. Get an accurate measurement of the ceiling & note precise locations of windows and doors. The measurement would be needed to buy right quantity of panels- you would require main runners, wall angles, cross tees & hanger wire as well.

Now, you have to decide on the level of suspension- chalk mark the level followed by nailing of wall angles along chalk line. Fasten the wall-angle brackets with strong nails & cut these brackets as per required lengths.

Next, you have to install the screws at the regular intervals. Your panels must be kept parallel to ceiling joists ensuring that main runner are at the right angle position to joists. Now, thread the hanger wire through screws in joists to suspend main runners.

Then, cut your hanger wire in parts (1 for each of the screw eyes) & fasten them safely. The next step is to extend the hanger wire right to runner ring followed by an accurate fastening. Set main runners in proper place. Now, thread loose wires via runner leg & fasten in right place. Make sure that everything is at proper level & so is the hanger length.

Now, it’s time to install cross tees. Push them in place at proper intervals along main runners.

Finally, you are all set to install the panels. Push panels via grid opening, one by one. Now, lower the panels gently ensuring that these are able to sit comfortable on brackets of grid.

Insulation tips for your home

January 1st, 2014 by Home Tips

If there is a proper heating system in your home yet it is not able to tone down the chill, a simple solution is there for you. Review your home’s insulation system. Insulation is a sort of blanket around your house which traps all the heat generated in the house with your activities inside the house and in the process keeps the house warm even in winters. Insulation is in most cases placed in the floors, the walls and the ceilings.

The largest amount of heat loss (about 40%) happens from the ceiling because of warm air’s tendency to rise up. Good ceiling insulation will keep the house the warmest and will also save energy.

Almost 20-30% heat loss happens through walls. Stress on wall insulation and siding should be given the most during construction of the house because upgrading it later is an expensive and difficult process.

Heat loss from floors is around 10-15%. Good insulation below the flooring ensures that the cold air that pushes all the heat towards the ceiling is removed. It is advisable to use a vapour resisting material for under floor insulation since that can prevent ground moisture from entering the house.

Evaluate and check the exiting insulation state of your house. Or if constructing, follow the insulation basics given above.

Blankets made from wool or polyester can be used to put in the walls and ceilings. Even loose fill insulation like foam insulation and cellulose can be used for this purpose. These products should be used for insulation implementation before construction. In the case of existing houses, you can put them into accessible ceiling cavities.

For floors, use reflective insulation systems such as aluminium foils. These work well for insulation as they reduce the downward flow of heat. You can also use rigid insulation made from polystyrene and plastic foams for insulating your floors.

You must look for the R-value while selecting insulating materials. This measures how well the product resists heat flow. A high R indicates insulation is effective, hence your house is kept warm easily.

Tips To Install External Wall Cladding

November 13th, 2013 by Home Tips

External Wall CladdingExternal wall cladding is the technology that protects the interior walls of your home from external things like weather and heat. Cladding can be found in many different types: PVC, wood siding, metal siding, cement, vinyl siding, cement fiber boards and even bricks come under the category of external wall cladding. However, installation of external wall cladding needs to be research before attempting to do it yourself. If you read these suggestions and decide it is too big a task to take on yourself, the expert team at Construction contracting companies can help you with your siding and cladding project. Here are some factors which you must focus on:
• Measurement: You need to follow a lot of measurement guidelines before you go settle on the right amount of external wall cladding materials. To do this you should include the measurement of the width and length of the walls. You will also need to know the measurements around the doors and the windows in case you want to install any channels or trims around them.

• Sheathing: Before starting the task of external wall cladding make sure you have installed all the plywood sheathing properly.

• House Wrapping and Foam Insulation: DIY people often overlook these two steps because they want to complete the task as soon as possible. However, these two are very important steps and need to be followed properly in order to ensure overall weather protection and energy efficiency. You need to wrap up the home with paper and then install foam insulation panels on it.

• Starter Row: External wall cladding starts with starter row which is installed right at the bottom of the wall. Make sure the starter row is leveled along the entire wall length for this will ensure the straightness of the rows that follow.

• Overlapping Successive Rows: In case of wood siding, metal siding, cement, and vinyl siding you need to make sure that the top of the bottom row is overlapped by each successive row. This prevents water seeping into the walls.
These are the points or steps that you should follow in order to experience a perfect external wall cladding.

Inexpensive ideas for beautiful wall décor

October 12th, 2013 by Home Tips

beautiful wall décorDo you want something refreshing on your walls but apprehensive about the high costs of wall décor assets? Well, wall décor can be pretty inexpensive yet beautiful if you know how to think smart. The post below is a highlight on how to decorate your walls tastefully but without getting overboard with the budget.

Do you have an eye for paintings but scared about the high price tags. Now, you can always go for the faux oil paintings in the market that look almost near to the authentic one and won’t cost you huge bucks to flaunt them on your walls. Don’t hesitate for putting up replicas- your house is no art gallery and you are just trying to beautify your home in a classy and cost-effective way.

Another good option for inexpensive wall décor is photographs. Get your favorite photographs from old albums and send them to the studio for lamination which you can happily put up on the walls. Otherwise you can buy beautiful photo frames from the gift shop and fix the photos there. It’s great if you have a gifted photographer at home, be it your spouse or son or daughter. Tell them to get their favorite shots for you which you can proudly flaunt on your walls.

Mirrors are good wall décor essentials and so are wall clocks. Get a decorative mirror or a trendy wall clock to liven up the walls wonderfully. Besides, you always have the option of painting the walls for a new look without putting pressure on the pocket. It’s great if you can get a fresh coat for all the walls- otherwise get a compatible color for one of the focal walls in the room. For example, when it comes to bedroom, the focal wall here is the wall behind your bed.

Innovative ideas on lighting your house

August 28th, 2013 by Home Tips

lighting your houseLighting is the most important thing in your house. The appearance of your house won’t reflect unless and until the lighting is done properly. In many cases you will find that a house looks very beautiful and attractive just because the lighting is done properly and in a beautiful way. whereas on the other hand a house with attractive and awesome interior decoration may not appear that beautiful and eye catching due to the lack of proper lighting. Your interior designer can help you in lighting your house properly. However if you have not appointed any interior designer, then you can also do the lighting on your own. Just that you have to do a light research study to know about the latest trends of lighting your house.

There are various types’ factors that should be taken in to consideration while lighting your house. The most important factor is the shape and size of your room. What should be the power of the light used and where it should be installed depend completely on these two things. If not fitted at the correct place, then the light will not be reflected properly causing improper illumination.

If you want a classy look to your home, there are various lamp shades that are designed in the Victorian style or in the Tuscany style. These lamp shades will really impart a royal aesthetic value to the interior of your home. Modern trendy lamp shades can also be used. They are less expensive and easy to fit to in your home. Even the power consumption is much less with a remarkable improvement in the illumination level.

A chandelier can make your house unique and attractive to the guests. Though the original French chandeliers or those made from venetian murano glass are much expensive, you also get a cheaper version of the chandelier that are sufficient enough to provide enough illumination and impart beauty to your home. Finally, the addition of a skylight can effectively light your home in a modern,stylish manner.

Benefits of having an indoor fountain

June 24th, 2013 by Home Tips

If you have just bought a new apartment and are doing up its décor then you can consider making an indoor fountain a part of that décor. A lot of people think that indoor fountains use a lot of water but with the introduction of the ones which reuse water, wastage of water is not a concern anymore. Also, apart from making a wonderful décor accessory, indoor fountains have other benefits also.

One of the biggest advantages of having and indoor fountain is, it brings a part of the nature into your room and this is extremely relaxing and soothing. In fact, it has been seen that people are able to concentrate better if they have an indoor fountain because it relaxes the brain. Also, the sound of the rippling water serves as an inspiration and allows people to work better. An indoor fountain in the bedroom helps people to sleep better.

Gazebos are a wonderful add on for your backyard

June 10th, 2013 by Home Tips

If you want to make your backyard more attractive, a gazebo placement would be a fantastic addition. You can use the gazebo for varied purposes- to use as a storage shade or for enjoying coffee with your family during the relaxed weekends or to throw small parties for your close cousins and friends. Gazebos are available in different sizes to choose for as per your specific need and space.
The most common gazebos are octagonal in shape. However you will also find rectangular or square gazebos these days. If you are interested in side-by-side seating arrangements, the octagonal one would be perfect for you. You will find gazebos in varied forms of materials such as wood, cement and brick.
Gazebos are available in both glazed and non-glazed doors. Glazed door would be god to allow maximum sunlight while the non glazed door option is perfect if you are seeking privacy.